Product Description:
The Vector™ Electrolysis System is the most advanced personal hair removal
system available. It permanently removes unwanted hair. For the first time ever,
it is now possible to perform professional electrolysis treatments in the privacy
of your own home. Unlike other devices that use radio frequencies and batteries,
the Vector™ uses the process of electrolysis to dissolve the hair follicle
with AC power. The Vector™ Hair Removal System is so advanced that it
achieves professional results without the use of a needle. Tweezers are used
to make the procedure safer and less painful. Clinical studies have shown that
the Vector™ system has equivalent effectiveness as professional needle
electrolysis. The Vector™ replaces salon visits and you will no longer
have to pay $80/hr for electrolysis sessions. The Vector™ Electrolysis
System comes with the Vector electrolysis machine, patch electrodes, conductivity
gel, and galvanic tweezers all for the unbelievably low price of just $199.95!
Vector Machine:
Our amazing Vector™ machine is only 3” wide, 1 ½”
high, 5” deep and produces same results as professional electrolysis machines
that cost thousands of dollars! Now you can perform real electrolysis in your
own home and not have to submit yourself to torture with a needle!
The Vector machine also offers other advantages over conventional electrolysis.
During conventional electrolysis the patient has to hold a metal rod smeared
with gel. With the Vector machine you only apply a resting electrode patch anywhere
on the body and continue with the treatment. It is incredibly easy to operate
the Vector™. There is no reason to shave anymore.
Here is what you get:
- The Vector™ machine.
- 8 Resting electrode patches.
- 2 oz. Supply of high viscosity no-needle conductive gel.
- Aligator clip patch cord.
- Galvanic Tweezers.
- 120V AC power cord.
This amazing machine will save you hundreds of dollars on electrolysis treatments,
razors, depilatories, and waxes!
How it Works:
Electrolysis is a process in which a needle is inserted into the hair shaft
and then an electrical current is passed through the hair follicle. Although
hair itself is dry, below the surface of the skin it is immersed in a watery
environment with a high mineral content. The electrical current from the needle
causes a chemical reaction and turns the water and salt in the hair follicle
into sodium hydroxide (NaOH), which is an extremely corrosive alkali. If you
were to put just a drop of pure sodium hydroxide on your skin, it would instantly
burn a hole right through. This sodium hydroxide dissolves the hair follicle
and the papilla causing a complete and permanent destruction of hair growth.
Even though this is a highly effective procedure, it is also has many drawbacks.
First of all, the insertion of a needle into the skin over and over again can
be quite painful. Treatment with a needle also requires a high degree of skill,
the technician must guide the needle very accurately to reach the bottom of
the hair follicle. Penetrating the skin with a needle also increases chances
of infection.
As it turns out, it is completely unnecessary to insert a needle to produce
sodium hydroxide in the hair follicle. The Vector™ machine works by simply
grasping the hair with tweezers and applying a highly conductive gel with silver
chloride. Without the electrically conductive gel this process would not work,
as hair cannot conduct electricity. Applying silver chloride gel to the hair
above the skin allows electrical current to pass over the non-conductive portion
down into the hair follicle.
The Vector™ machine gives you incredible ease of operation and with the
same results as regular needle electrolysis! Everyone knows how to use tweezers
and you will be able to start using the Vector machine in just minutes!
Truth About Hair Removal:
Have you tried using all kinds of different gadgets, razors, waxes, depilatories,
and magic lotions and still have unwanted hair? The truth is, none of these
methods work and will only leave you disappointed, as well as waste your time.
Here is another fact: The only known method of permanent hair removal is electrolysis.
But anyone who has undergone electrolysis treatments will tell you that it can
be quite intimidating to have a needle inserted into each hair follicle over
and over again. Perhaps most intimidating of all is the cost; electrolysis treatments
are on average $60-$100/hour and require at least one session a week for a period
of several months to over a year. An alternative is to undergo laser hair removal,
it will take less time to treat large areas but it will cost more then electrolysis
per session and the results are not even permanent. You will have to continue
with the treatments periodically to maintain the results.
Consumers have spent millions of dollars on products that have no effect. There
is no magic lotion or device that will get rid of unwanted hair overnight. If
you have been fooled into purchasing those products by false advertising you
may be reluctant to believe our claims as well. Rest assured that you will have
real results and PERMANENT hair removal. The Vector™ is your professional
electrolysis in a small box.
Vector vs. Radio Frequency Devices:
Have you been sorely disappointed by that useless gadget you bought from a
department store or a television infomercial? Was it not any different that
simply tweezing your hair? Yes, it was a complete waste of time and money.
Radio frequency devices work on the concept that radio frequency (RF) energy
gets transmitted by the electronic tweezers down the hair shaft. RF energy is
similar to the energy produced in a microwave which causes a heating effect.
The heat will dehydrate and coagulate the hair bulb and the papilla. Unfortunately,
hair cannot conduct current and therefore radio frequency (an alternating current)
will not move or flow down the hair shaft. There will be no dehydration or coagulation
of the hair shaft.
There is some heating of the actual hair that is in contact with the tweezers
due to friction heat caused by spinning water molecules. Heat can potentially
travel down the hair shaft but none of it will actually reach the hair follicle.
This is due to the fact that these devices have an FDA assigned frequency of
27.12MHz and a power output of 1.5 Watts. This wattage is so low that it takes
60 seconds of RF energy to increase the temperature of the hair follicle by
2°F.
Now consider the following; it takes at least 108°F to cause any kind of
damage to the hair follicle. With the normal body temperature of 98°F, you
will have to hold each hair for at least 5-6 minutes, one by one, to see any
kind of result whatsoever. No one would ever make that kind of a time investment.
While lasers are now a very effective method of hair removal, this method is
not permanent and the treatment is very expensive. Here is some additional information
you might want to know about lasers.
• Lasers only work on people with very light skin.
• Lasers do not work on people with gray, red, or light hair.
• Lasers can’t be used on sensitive skin.
• Laser treatment is very painful.
• Lasers can’t be used on areas with moles, freckles, or scars.
In comparison, treatment with the Vector™ machine works on any individual
is far less painful, and the results are permanent.
Fed Price $124.90