Lumagen Vision Video Processor

Availability: Usually ships the next business day.
Code: Lumagen Vision
Regular $999.95Fed Price $996.00
Qty.

Federal Stereo Wishlist
Email to a Friend
Rate This Product

• Composite, SVideo, and Component video
• Pass-through, with 300 MHz bandwidth
• Studio quality TV decoder with 10-bit A/D
• Adaptive comb-filter (3 or 4 line) for reduction of cross-luma and cross-chroma artifacts
• Automatic selection of NTSC (M, Japan, 4.43), PAL (B, D, G, H, I, M, N, Nc) or SECAM (B, D, G, K, K1, L) for composite and SVideo.

Video Processing:

• Film pull-down reconstruction (3:2 and 2:2)
• Per-pixel motion-adaptive video deinterlacing
• Detail-enhancing resolution scaling
• Programmable cropping for each input memory
• Black-level, contrast, color and hue calibration
• Chroma-phase calibration
• Source aspect ratio selection of 4:3, letter-box and 16:9, with two zoom levels each
• Two memories per input, for input calibration, and output setup

• Programmable output resolution from 480p to 1080p in scanline increments, plus 1080i
• Programmable vertical refresh rate from 48 to 75 Hertz, in steps of 0.01 Hertz
• Programmable output aspect ratio from 1.33 to 2.35, in steps of 0.01
• 10-bit oversampled digital-to-analog conversion
• RGBHV, RGBS, RGsB, or YPRPB output format
• Embedded bilevel or trilevel sync
• Discrete RGB sync polarities are programmable

• Infrared remote
• Menu-based setup with on-screen display
• Configuration save with undo and lock
• Supply range of 100 to 240 volts at 47 to 63 Hz.
• Case: 8x2x9 inches (203x51x23 mm)
• Silent operation (no fan)