- Nominal Impedance [Zn], 4 ohms [per enclosure]
- Sensitivity [SPLo], dB @ 1W, 1m 93.8
- Power Handling Watts, Peak (RMS) 300 (150)
- Enclosure Top Surface Depth, in (cm) 4 (10.2)
- Enclosure Bottom Surface Depth, in (cm) 7 5/8 (19.4)
- Enclosure Height, in (cm) 15 (38.1)
- Enclosure Width, in (cm) 21 1/2 (54.6)
The TC Series vented enclosure combines KICKER’s award winning line of subwoofers w/computermodeled and human fine-tuned enclosures to offer a level of bass performance never before thought possible from a commercially available, ready-to-install subwoofer system. The TC Series enclosure is available w/a pre-loaded 10 inch Comp. The Kicker TC Series enclosure is designed to fit behind the seat of a pickup truck, coupe or wherever space is limited. This design is engineered to provide the best bass response when firing into the back of the seat. The vent opening in this enclosure can not be obstructed. At some frequencies most of the bass will come out of the vent. Therefore we recommend you leave at least four inches (10cm) of clear space around the vent. Plug your subwoofer speaker wire into the terminals, using the red connector as positive & the black connector as negative. Hook the other end of the wire to your subwoofer amplifier in accordance with its owner's manual.
Pro Tip: You are one ZX Mono- Amplifier & a few cables away from a slamm’in system! The Kicker ZX line of mono-amplifiers make it easy to upgrade to rocksolid bass w/your existing or stock source unit. Please ask your dealer about the Kicker ZX Amplifier upgrades.